| WAX |
Directions |
Melt & Flash Point |
1 Pound |
10 Pounds |
50 Pounds |
TXCS1230 Palm Wax
Comes in powder form
Good Hot and Cold throw
Crystal Finish
6-10% Typical fragrance oil retention (do not go above 12%)
Note: Needs 5% Stearic Acid added to this wax DISCONTINUED,NOT AVAILABLE.
|
Heat wax to approx. 185 degrees F. Add Stearic Acid, then add Fragrance and dye at approx. 180 degrees. Raise temperature and pour at approx 190-195 degrees. |
|
NA
|
$13.50
|
$67.00
|
TXCS-54100-S
51% Soy Container Blend
One-pour container blend wax
Soft & Creamy Texture
Smooth, Flat Top - No Cracking
Excellent Hot & Cold Scent Throw
6-10% Typical Fragrance Oil Retention (do not go above 12%)Slab 11.4 lbs, 57 lbs. Case. CALL FOR INFO. IMPROVED FORMULA>PLEASE NOTE.DUE TO LOW MELTING POINT, SHIPMENT OF SINGLE SLABS IS DISCONTINUED TILL OCTOBER THIS WAX MELTS IN THE DELIVERY VEHICLES>
|
Heat wax to approx. 185° F. Add Dye at approx. 160°Add fragrance @ 150-160F . Pour at approx. 150-160° for best adhesion to jars. Allow candles to cool slowly (group candles together) to avoid sink holes & wetspots. |
Melt Point: 124° |
NA
|
$19.00
|
$79.95
|
TXCS-5468
Low Shrink Container Blend
One-pour container blend wax
Soft & Creamy Texture
Excellent Hot & Cold Scent Throw
Bright Finish & Good Adhesion to Jars
6-10% Typical Fragrance Oil Retention (do not go above 14%),slab 11.4 lbs./ case 57 lbs.
|
Heat wax to approx. 185° F. Add Dye at approx. 180°Stir for 3 mins.,add fragrance oil at 170F, stir for 3 mins. Pour at approx. 160-165° for best adhesion to jars. Allow candles to cool slowly (group candles together) to avoid sink holes & wetspots |
Melt Point: 128° |
NA
|
$19.95
|
$79.95
|
TXCS-7410 V&P
Votive and Pillar Blend Wax, Smooth, Translucent Finish, Excellent Scent Throw. Good Mold Release, slab 11.4 lbs., case 57 lbs. product. NEW......
|
Heat Wax to approx. 170-180°. Add dye, Add fragrance @ 160 -165F. Pour at approx. 150-160°. 8% fragrance load, recommended |
Melt Point: 165°(high for this type wax) |
NA
|
$19.00
|
$78.25
|
Yellow Beeswax
The burning characteristics of beeswax candles differ from those of paraffin. A beeswax candle flame has a "warmer," more yellow color than that of paraffin. Beeswax candles burn cleanly, with little or no wax dripping down the sides and little visible smoke.
|
Beeswax has a high melting point range, of 62 to 64 °C (144 to 147 °F) |
|
$8.00
|
NA
|
NA
|
